Do scrap yards take bathtubs

If you have a cast iron sink or tub, it may very well be worth scrapping, especially if you can’t find some way of selling it to someone else. While you can find ways to repurpose a cast iron sink or tub, you may also need to get rid of it from your home.

What can I do with an old metal bathtub?

1. Turn it into a planter in your garden. Are you a gardener? …
2. Transform it into an outdoor sofa. …
3. Transform it into a chaise lounge. …
4. Turn it into a couch. …
5. Upcycle it into a chair. …
6. Transform it into a coffee table and planter. …
7. Turn it into an outdoor pond. …
8. Turn it into an ice chest.

How heavy is an old bathtub?

Cast iron bathtubs typically weigh between 240 and 500 pounds; however, the actual weight depends on the size and type of bathtub. What is this? Alcove cast iron bathtubs are usually 60 inches long, hold 32 gallons of water, and weigh 320 pounds on average.

Do scrap yards take porcelain?

If your porcelain fixtures aren’t chipped or stained, this is one of the best options to take. Note that the metal components you removed, like the faucet and water taps, may be reusable if in good shape. If they’re not, you can likely recycle them as scrap metal.

How much does a steel bathtub weigh?

When comparing enameled steel versus cast iron tubs, cast iron tubs clearly lose in the weight category. Cast iron tubs can weigh between 300 and 500 pounds, whereas enameled steel tubs tend to be around 75 pounds—which is comparable with acrylic tubs.

How do I know if my tub is steel or cast iron?

1) Remove the overflow cover and popup lever from the head end of the tub and look at the edge of the hole. You should see black cast iron or bright steel. Also, if you remove the overflow cover, the material between it and the plumbing will be about 1/4 ” thick if it is cast iron. 1/16″ if it is steel.

How do you recycle a bath?

When sinks, toilets and baths are cracked, badly chipped or generally past their best and cannot be re-purposed or re-sold they can be disposed of at your local Household Waste Recycling Centre (HWRC), otherwise known as ‘the tip’.

How much are clawfoot tubs worth?

The average all-in cost of a vintage clawfoot tub is $2,850. This includes the tub, refinishing, hardware and installation. Likewise, the all-in average cost for an acrylic clawfoot is $2,250. Alex Luna, owner of Tubs and Tops, has been refinishing claw foot tubs for 25 years.

Can cast iron bathtubs be recycled?

No problem. Cast iron is totally recyclable. Since iron is the main component of steel, you should refrain from throwing it away. Your used cast iron appliances can be melted down and crafted into something brand new, and you can even get money for it!

How can you tell if a tub is cast iron?

A cast iron tub will sound like a deep gong, just as if you hit a cast iron frying pan. Look at the bottom of the tub if possible. A cast iron tub will be black, and a steel tub will be metallic, although it may be covered with a layer of paint. An acrylic tub will look like coated plastic.

Article first time published on

How much human weight can a bathtub hold?

So, how much weight can your bathtub hold? Research shows that a standard tub made of porcelain can hold around 40 to 60 gallons of water or 335 to 500 pounds. That might seem like a large span, but that is because the amount a tub can hold is also directly related to its size.

How much does a tub full of water weigh?

A standard bathtub can hold between 40 and 60 gallons of water. A gallon of water weighs approximately 8.35 pounds, so a standard tub filled with water can weigh between 335 and 500 pounds.

How heavy is a claw foot tub?

How heavy is a clawfoot tub? All bathtubs are heavy, but clawfoot tubs tend to be especially heavy – particularly the cast-iron models. A cast-iron tub can easily weight 200-400 pounds while empty – fill it with water and climb in and you’re looking at several hundred pounds of weight.

Is a cast iron tub considered scrap metal?

If you have a cast iron sink or tub, it may very well be worth scrapping, especially if you can’t find some way of selling it to someone else. While you can find ways to repurpose a cast iron sink or tub, you may also need to get rid of it from your home.

How much do acrylic bathtubs weigh?

Acrylic is one of the more common tub materials thanks to its light weight and its affordability. An empty acrylic tub weighs around 75 pounds on average. By comparison, a cast iron tub weighs upward of 300 pounds, which makes it a difficult option for the average DIY bathroom remodeler.

How much does a Jacuzzi bathtub weigh?

There is no single standard hot tub weight. In general, a small two- or three-person hot tub generally weighs around 500 pounds empty and 3,000 pounds when filled with water. A six-person model typically weighs approximately 1,000 pounds empty or 6,000 pounds full.

What can I do with old bathroom products?

Put a Bin in the Bathroom Take these things to the curb or kitchen or start recycling them in the bathroom – just make sure they don’t end up in the trash! You can confidently recycle: Toilet paper and paper towel rolls. Plastic wraps and films (like the ones that your toilet paper may come packaged in)

How do you recycle shampoo?

Depending on how much you create shampoo bottle waste, you can set aside the bottles for six months. After this, you can then tie up your plastic bag full of shampoo bottles and put them in your recycling bin. To be sure, you can place a call to your local recycling center to confirm if they have picked up services.

How do you dispose of bubble bath?

For bottles that can be completely emptied of their contents – remove as much of the product directly into the trash where it will go into a landfill. Do not rinse the bottle out, but you can take a paper towel and wipe it clean. If the makeup bottle is plastic or glass you can recycle it afterward.

Will a magnet stick to a cast iron tub?

A magnet will stick to steel or cast iron tubs, but not to fiberglass. Knock on the tub a few times. If you have a cast iron tub, the sound will dampen quickly and will be a lower pitch. These are very dense tubs, so knocking on cast iron should result in a quiet sound.

Will a magnet stick to cast iron?

Yes, a magnet will be attracted to iron in any form, including cast iron, and any iron ally such as any of the steel alloys.

Why do magnets stick to bathtubs?

Steel and cast iron tubs are magnetic. If you hold a strong magnet near the wall of the tub, it should stick. You may already have magnets on the bottom of your shower curtain to hold it in place and keep the water inside the tub. If the magnets do not stick, that is a definite indicator of fiberglass or acrylic.

Do scrap yards take cast iron?

Being one of the most commonly used metals in the US, Cast Iron scrap is one of the most traded scrap material by the US scrap yards. It is required to turn Cast Iron scrap into a usable form before delivering it to a scrap yard. Insulations, if any, must be removed.

What is the price for scrap cast iron?

TypePrice Per Lb.Steel$0.01Light Iron$0.01Cast Iron$0.02-0.035Whole Cars$0.02-0.03

How much can you sell an old clawfoot tub for?

A 5′ roll rim tub may sell for $50 while a 5′ French double-ended clawfoot tub may sell for $2000. A few of the manufacturers of antique tubs were American Standard a/k/a Standard, Crane, Mott, and Kohler.

Why are clawfoot tubs bad?

“It doesn’t butt up against the wall, so you get a lot of spillage and it can cause damage to your wall or can seep in and actually drip down from your bathroom to your lower level ceiling,” Jonathan Scott of HGTV’s Property Brothers, told PopSugar. … Consider tiling bathroom walls or nixing a clawfoot tub altogether.

Is resurfacing a tub worth it?

Bathtub refinishing is worth the money if your tub is in good working condition. The reglazing process can remove surface imperfections, like scratches, shallow cracks, and stains. But if your tub is old, leaking, or full of mold, reglazing is just a waste of money. You’ll have to buy a new tub soon anyway.

What were old bathtubs made of?

Unlike the plain molded fiberglass tubs popular today, some of the earliest bathtubs were intricately carved wooden cabinets lined with tin or copper. Next came more sanitary materials, like vitreous china, glazed earthenware, and porcelain-coated cast iron.

Is cast iron worth anything?

The value of antique cast iron skillets can start at similar to new prices, but a super rare Wagner or Griswold can fetch up to $1,500 apiece. A mint condition, super rare “spider skillet” made in the 1890s by Griswold is worth up to $8,000. … If your pan was made before 1957, it’s considered vintage cast iron.

How do I know if my tub is enamel or porcelain?

PORCELAIN TUBS But there’s a simple item you can use to determine bathtub types in this situation: a magnet. Since enamel tubs cover cast iron or steel, they’ll be magnetic. So if the magnet doesn’t stick, you have a porcelain tub. Porcelain tubs have a higher tolerance for cleaning agents than enamel or acrylic tubs.

Can my floor hold a bathtub?

In general, unless there is something wrong with the joist spacing or the wood has rotted, the framing in most houses should be able to support a standard size cast iron tub with no problem. A standard size is approximately 32 inches wide by 60 inches long.